Electro-Sat · information & service

Amiko MiraX HiS-2000 – connect the dish and network

Start with your TV signal

Connect the satellite dish cable to this receiver’s satellite input. Select satellite tuning and check which satellite your dish receives.

Connections and features

TV signal
DVB-S2
Ethernet
100 Mbps
USB
2 × USB 2.0

Connection guide for Amiko MiraX HiS-2000

Choose the connection you want to use at home.

My TV has a free HDMI input

Check whether the Amiko MiraX HiS-2000 has an output marked HDMI. Connect it to a free TV input and select the same input number.

My TV has no free HDMI input

If all HDMI inputs are occupied, temporarily use an input from another device. If the TV has no HDMI input at all, check the receiver outputs and TV inputs before buying an adapter.

I want to use a cable from my router

Connect an Ethernet cable between a LAN port on your router and the receiver. The listed port speed is 100 Mbit/s. Your internet plan or streaming service may be slower.

I want to connect wirelessly

Check the manual for this version to see whether Wi-Fi is built in or requires a specific adapter.

I receive TV through a coax cable

Check the signal type first. DVB-S/S2 is satellite, DVB-T/T2 is terrestrial and DVB-C is cable. The connector alone does not establish which channels you can receive. Tuners listed for this version: DVB-S2.

What cable length do I need?

Measure the route along the furniture or wall, including bends. Add up all sections in centimetres. Optionally allow extra length to move the receiver forwards.